sa01d sries 1w dc/dc converter, smd-package ds_sa01d_03152012 e-mail: dcdc@delta.com.tw http://www.delta.com.tw/dcdc p1 features ? efficiency up to 80% ? smd package with industry standard pinout ? dual outputs ? isolation voltage 1000 vdc ? operating temperature range ?40 to +85c ? low ripple and noise ? lead free, rohs compliant ? moisture sensitivity level (msl) 3 ? 3 years product warranty the sa01d series are miniature, smd package, isolated 1w dc/dc converters with 1,000vdc isolation. it allows a wide operating temperature range of ?40c to +85c. these isolated dc/dc converters are the latest offering from a world leader in power systems technology and manufacturing D delta electronics, inc. with creative design technology and optimization of component placement, these converters possess outstanding electrical and thermal performance, as well as extremely high reliability under highly stressful operating conditions. model list output current input current efficiency (typ.) input voltage (range) output voltage max. min. @max. load @no load load regulation max. capacitive load @max. load model number vdc vdc ma ma ma(typ.) ma(typ.) % (max.) uf % sa01d0505a 5 100 2 267 10 75 sa01d0509a 9 55 1 260 10 76 sa01d0512a 12 42 0.8 255 8 79 sa01d0515a 5 (4.5 ~ 5.5) 15 33 0.7 251 30 7 33 79 sa01d1205a 5 100 2 111 8 75 sa01d1209a 9 55 1 109 8 76 sa01d1212a 12 42 0.8 105 5 80 sa01d1215a 12 (10.8 ~ 13.2) 15 33 0.7 103 15 5 33 80 sa01d2405a 5 100 2 56 8 74 sa01d2409a 9 55 1 55 8 75 sa01d2412a 12 42 0.8 53 5 79 sa01d2415a 24 (21.6 ~ 26.4) 15 33 0.7 52 9 5 33 79 input characteristics parameter model min. typ. max. unit 5v input models 4.5 5 5.5 12v input models 10.8 12 13.2 input voltage range 24v input models 21.6 24 26.4 5v input models -0.7 --- 9 12v input models -0.7 --- 18 input surge voltage (1 sec. max.) 24v input models -0.7 --- 30 vdc reverse polarity input current --- --- 0.3 a input filter internal capacitor internal power dissipation all models --- --- 450 mw
ds_sa01d_03152012 e-mail: dcdc@delta.com.tw http://www.delta.com.tw/dcdc output characteristics parameter conditions min. typ. max. unit output voltage accuracy --- 1.0 3.0 % output voltage balance dual output, balanced loads --- 0.1 1.0 % line regulation for vin change of 1% --- 1.2 1.5 % load regulation io=20% to 100% see model selection guide ripple & noise (20mhz) --- 60 120 mv p-p ripple & noise (20mhz) over line, load & temp. --- --- 150 mv p-p ripple & noise (20mhz) --- --- 15 mv rms temperature coefficient --- 0.01 0.02 %/ short circuit protection 0.5 second max. general characteristics parameter conditions min. typ. max. unit i/o isolation voltage (rated) 60 seconds 1000 --- --- vdc i/o isolation resistance 500 vdc 1000 --- --- m ? i/o isolation capacitance 100khz, 1v --- 40 100 pf switching frequency 50 100 140 khz mtbf (calculated) mil-hdbk-217f@25 , ground benign 2,000,000 --- --- hours moisture sensitivity level (msl) ipc/jedec j-std-020d level 3 recommended input fuse 5v input models 12v input models 24v input models 500ma slow-blow type 200ma slow-blow type 100ma slow-blow type environmental specifications parameter conditions min. max. unit operating temperature range (with derating) ambient -40 +85 case temperature --- +90 storage temperature range -50 +125 humidity (non condensing) --- 95 % rel. h cooling free-air convection lead temperature (1.5mm from case for 10sec.) --- 260 power derating curve output power (%) notes 1 specifications typical at ta=+25 , resistive load, nominal input voltage and rated output current unless otherwise noted. 2 ripple & noise measurement bandwidth is 0-20mhz. 3 these power converters require a minimum output loading to maintain specified regulation, operation under no-load conditions will not damage these modules; however they may not meet all specifications listed. 4 all dc/dc converters should be externally fused at the front end for protection. 5 specifications subject to change without notice. p2
ds_sa01d_03152012 e-mail: dcdc@delta.com.tw http://www.delta.com.tw/dcdc mechancial drawing mechanical dimensions (5v & 12v input) connecting pin patterns mechanical dimensions (24v input) pin connections pin function 1 -vin 2 +vin 3 na 4 common 5 -vout 6 na 7 +vout 8 na 9 na 10 na na : not available for electrical connection ? all dimensions in mm (inches) ? tolerance: x.x0.25 (x.xx0.01) x.xx0.13 ( x.xxx0.005) ? pins 0.05 (0.002) physical outline case size (5v&12v input) : 15.24x8.0x6.8mm (0.60x0.31x0.27 inches) case size (24v input) : 15.24 x8.3x7.8mm (0.60x0.33x0.31 inches) case material : molding (flammability to ul 94v-0 rated) weight (5v&12v input) : 1.8g weight (24v input) : 2.2g p3 123 5 10 9 8 6 9.0 [0.35] 7.4 [0.29] s seating plane ( magnification of a ) 0.25 [0.01] 8.3 [0.33] 15.24 [0.6] [0.1] 2.54 8.05 0.5 [0.32 0.02] 0.25 [0.01] 0.60 [0.02] 4 7 [0.4] 10.16 11.2 [0.44] 7.8 [0.31] 0.15 s r 0 . 5 0 ~ 4 15.3 [0.6] 8.0 [0.31] 7.1 0.5 [0.28 0.02] 0.3 0.60 [0.02] [0.01] 1 23 4 10 9 8 7 [0.1] 2.54 [ 0.4] 10.16 5 6 9.2 [0.36] 7.0 [0.28] a 0.3 [0.01] 11.2 [0.44] 6.8 0 ~ 4 r 0 . 5 s seating plane 0.15 s ( magnification of a ) [0.27] 1.7 [0.07] 10.16 [0.40] 10.8 [0.43] 2.54 [0.10] 1.0 [0.04]
ds_sa01d_03152012 e-mail: dcdc@delta.com.tw http://www.delta.com.tw/dcdc part numbering system s a 01 d 05 05 a form factor family series watt number of outputs input voltage output voltage option code d-dip a~z 01:1w s - single 03:3.3v 03:3.3v a - std. functions p-sip 02:2w d- dual 05: 5v 05: 5v s-smd 03:3w 12:12v 12:12v 04:4w 24: 24v 15: 15v 06:6w 48:48v 24: 24v warranty delta offers a three(3) years limited warranty. complete warranty information is listed on our web site or is available upon re quest from delta. information furnished by delta is believed to be accurate and reliable. however, no responsibility is assumed by delta for its use, nor for any infringements of patents or other rights of third parties, which may result from its use. no license is granted by implication or otherwise under any patent or patent rights of delta. delta reserves the right to revise these specifications at any time, without notice. p4
|
